International Journal of Advance Research and Innovation


ISSN: 2347-3258

Volume 5 Issue 1

DOI Paper Name Author(s) Citation
DOI: https://doi.org/10.51976/ijari.511702 Revitalizing Neighbourhood through Sustaiable Waterfront Development Tanya Gupta

Gupta, T. (2017). Revitalizing Neighbourhood Through Sustaiable Waterfront Development.  International Journal of Advance Research and Innovation, 5 (1 ), 1-8.
DOI: https://doi.org/10.51976/ijari.511703 Ecological Park as an Emerging Type for Sustainable City-A Need Chandrakala Kesarwani

Kesarwani, C. (2017). Ecological Park as an Emerging Type for Sustainable City: A Need.  International Journal of Advance Research and Innovation, 5 (1 ), 9-16.
DOI: https://doi.org/10.51976/ijari.511704 Developing Methodology for Strategic Environment Assessment for Urban Transportation Policy: A Case of Ahmadabad City, India Abhinav Garg

Garg, A. (2017). Developing Methodology for Strategic Environment Assessment for Urban Transportation Policy: A Case of Ahmadabad City, India.  International Journal of Advance Research and Innovation, 5 (1 ), 17-32.

 
DOI: https://doi.org/10.51976/ijari.511705 Design and Simulation of Eighth-Order Active-R Band Pass Filter using Multiple Feedback Topology BA Atsuwe
GA Igwue
AN Amah

Atsuwe, B.A., Igwue, G.A., & Amah, A.N. (2017). Design and Simulation of Eighth-Order Active-R Band Pass Filter using Multiple Feedback Topology.  International Journal of Advance Research and Innovation, 5 (1 ), 33-36.
DOI: https://doi.org/10.51976/ijari.511706 Dielectric Spectroscopy near the Smectic C* Phase Ferroelectric Liquid - Crystalline Material Bishan Pal Singh
Jitendra K Kushwaha
Dharmendra Kumar

Atsuwe, B.A., Igwue, G.A., & Amah, A.N. (2017). Design and Simulation of Eighth-Order Active-R Band Pass Filter using Multiple Feedback Topology.  International Journal of Advance Research and Innovation, 5 (1 ), 33-36.
DOI: https://doi.org/10.51976/ijari.511707 Calculations of Atomic Parameters of Highly Charged Fe Ions for Interpreting Astrophysical Spectra Gajendra Singh
AK Singh
Basu Kumar
Anil Kumar

Singh, G. , Singh, A.K., Kumar, B. , & Kumar, A. (2017). Calculations of Atomic Parameters of Highly Charged Fe Ions for Interpreting Astrophysical Spectra.  International Journal of Advance Research and Innovation, 5 (1 ), 40-45.

 
DOI: https://doi.org/10.51976/ijari.511708 Image De-Noising using Wavelet-Like Transform Sushil Kumar

Kumar, S. (2017). Image De-noising using Wavelet-Like Transform.  International Journal of Advance Research and Innovation, 5 (1 ), 46-50.

 
DOI: https://doi.org/10.51976/ijari.511709 Drastic Revolution in Supply of Renewable Energy and Astonished Energy Performance Technologies Vinay Dua

Dua, V. (2017). Drastic Revolution in Supply of Renewable Energy and Astonished Energy Performance Technologies.  International Journal of Advance Research and Innovation, 5 (1 ), 51-55.
DOI: https://doi.org/10.51976/ijari.511710 Biodegradability of Laundry Detergent Surfactants Divya Bajpai Tripathy
Anuradha Mishra
Anjali Gupta
Alpa Yadav

Tripathy, D.B., Mishra, A. , Gupta, A. , & Yadav, A. (2017). Biodegradability of Laundry Detergent Surfactants.  International Journal of Advance Research and Innovation, 5 (1 ), 56-68.
DOI: https://doi.org/10.51976/ijari.511711 Spectral and Biological Investigation of 5-Phenyl-1,3,4-Oxadiazole-2-Thiol Rovin
Dharmendra Kumar
Vikas Kumar
Leeladhar

Rovin, , Kumar, D. , Kumar, V. , & Leeladhar. (2017). Spectral and Biological Investigation of 5-Phenyl-1,3,4-Oxadiazole-2-Thiol.  International Journal of Advance Research and Innovation, 5 (1 ), 69-73.
DOI: https://doi.org/10.51976/ijari.511712 Major Ions Chemistry of Surface Water in Bhindawas Wetland, Haryana Vandana Shan
SK Singh
AK Haritash

Shan, V. , Singh, S.K., & Haritash, A.K. (2017). Major Ions Chemistry of Surface Water in Bhindawas Wetland.  International Journal of Advance Research and Innovation, 5 (1 ), 74-80.

 
DOI: https://doi.org/10.51976/ijari.511713 A 0.18μm Low Power, High Speed Ternary Content Addressable Memory Ankaj Gupta
Ankit Gambhir

Gupta, A. , & Gambhir, A. (2017). A 0.18μm Low Power, High Speed Ternary Content Addressable Memory.  International Journal of Advance Research and Innovation, 5 (1 ), 81-84.
DOI: https://doi.org/10.51976/ijari.511714 Real Time GPS for Railway Automation System Rahul Dhote
Dinesh Rojatkar

Dhote, R. , & Rojatkar, D. (2017). Real Time GPS for Railway Automation System.  International Journal of Advance Research and Innovation, 5 (1 ), 85-89.

 
DOI: https://doi.org/10.51976/ijari.511715 A Study on Automatic Railway Gate Control System Shubham Shrirao
Dinesh Rojatkar

Shrirao, S. , & Rojatkar, D. (2017). A Study on Automatic Railway Gate Control System.  International Journal of Advance Research and Innovation, 5 (1 ), 90-93.
DOI: https://doi.org/10.51976/ijari.511716 Li-Fi Technology: A New Revolution in Wireless Technology Ajay Shende
Dinesh Rojatkar

Shende, A. , & Rojatkar, D. (2017). Li-Fi Technology: A New Revolution in Wireless Technology.  International Journal of Advance Research and Innovation, 5 (1 ), 94-96.

 
DOI: https://doi.org/10.51976/ijari.511717 Communication based Train Control System Shriansh Rasekar
Dinesh Rojatkar

Rasekar, S. , & Rojatkar, D. (2017). Communication Based Train Control System.  International Journal of Advance Research and Innovation, 5 (1 ), 97-100.
DOI: https://doi.org/10.51976/ijari.511718 A Survey on Transferring Standards of GSM-R in Railway Sector Nikhil Korde
Dinesh Rojatkar

Korde, N. , & Rojatkar, D. (2017). A Survey on Transferring Standards of GSM-R in Railway Sector.  International Journal of Advance Research and Innovation, 5 (1 ), 101-105.

 
DOI: https://doi.org/10.51976/ijari.511719 A Review on the Optimization of Parameters of Gas Tungsten Arc Welding of Aluminium and Aluminium Alloys Swapnil Verma
Sidharth Singh
Shubham Govil
Neha Bhadauria

V., S. , Singh, S. , Govil, S. , & Bhadauria, N. (2017). A Review on the Optimization of Parameters of Gas Tungsten Arc Welding of Aluminium and Aluminium Alloys.  International Journal of Advance Research and Innovation, 5 (1 ), 106-110.
DOI: https://doi.org/10.51976/ijari.511720 Cost Estimation of Pipe Friction Stirs Welding Ibraheem Sabry
Ahmed M El-Kassas

Sabry, I. , & El-Kassas, A.M. (2017). Cost Estimation of Pipe Friction Stirs Welding.  International Journal of Advance Research and Innovation, 5 (1 ), 111-120.
DOI: https://doi.org/10.51976/ijari.511721 Structural Design & Optimization of an Unmanned Aerial Vehicle Wing for SAE Aero Design Challenge Harsh Raj Chauhan
Harsh Panwar
Vikas Rastogi

Chauhan, H.R., Panwar, H. , & Rastogi, V. (2017). Structural Design & Optimization of an Unmanned Aerial Vehicle Wing for SAE Aero Design Challenge.  International Journal of Advance Research and Innovation, 5 (1 ), 121-127.

 
DOI: https://doi.org/10.51976/ijari.511722 Wire-EDM: A Potential Manufacturing Process for Gamma Titanium Aluminides in Future Aero-Engines S Anurag

Anurag, S. (2017). Wire-EDM: A potential Manufacturing Process for Gamma Titanium Aluminides in Future Aero-Engines.  International Journal of Advance Research and Innovation, 5 (1 ), 128-134.
DOI: https://doi.org/10.51976/ijari.511723 Study on Some Advanced Techniques to produce Biodiesel from Non-Edible Oils Osama Khan
M Emran Khan
Ashok Kumar Yadav
Saurabh Kumar Gupta

Khana, O. , V., M.E., Yadava, A.K., & Guptab, S.K. (2017). Study on Some Advanced Techniques to Produce Biodiesel from Non-edible Oils.  International Journal of Advance Research and Innovation, 5 (1 ), 135-143.

 
DOI: https://doi.org/10.51976/ijari.511724 The Analysis of the Throttle Body of the Intake System in the Engine through CFD Chang Chun Xu
Bhupendra Singh Chauhan
Haeng Muk Cho

Xu, C. , Chauhan, B.S., & Cho, H.M. (2017). The Analysis of the Throttle Body of the Intake System in the Engine through CFD.  International Journal of Advance Research and Innovation, 5 (1 ), 144-148.
DOI: https://doi.org/10.51976/ijari.511725 Optimization of Machining Parameters in CNC Turning of Hybrid Metal Matrix Composites using Different Techniques: A Review Vaibhav Sharma
Ravi Butola

Sharma, V. , & Butola, R. (2017). Optimization of Machining Parameters in CNC Turning of Hybrid Metal Matrix Composites using Different Techniques: A Review.  International Journal of Advance Research and Innovation, 5 (1 ), 149-156.
DOI: https://doi.org/10.51976/ijari.511726 Study of Concentrated Solar Power and their Application in Metro Stations Hukam Singh
Shailesh Kumar Singh
Ashutosh Kumar
Rangnath MS

Singh, H. , Singh, S.K., Rai, A.K., & S., R.M. (2017). Study of Concentrated Solar Power and their Application in Metro Stations.  International Journal of Advance Research and Innovation, 5 (1 ), 157-161.
DOI: https://doi.org/10.51976/ijari.511727 Effects of Dual-Fuel at Different Engine Parameters Hukam Singh
Shailesh Kumar Singh
Ashutosh Kumar Rai
Rangnath MS

Singh, H. , Singh, S.K., Kumar, A. , & S., R.M. (2017). Effects of Dual-fuel at Different Engine Parameters.  International Journal of Advance Research and Innovation, 5 (1 ), 162-166.
DOI: https://doi.org/10.51976/ijari.511728 Experimental Investigation and Comparison between an Integrated Compound Parabolic Domestic Solar Water Heater with and without an Air Gap introduced at the Arms of the CPC Jaji Varghese
Samsher
Manjunath K

Varghese, J. , Samsher, , & K., M. (2017). Experimental Investigation and Comparison Between an Integrated Compound Parabolic Domestic Solar Water Heater with and Without an Air Gap Introduced at the Arms of the CPC.  International Journal of Advance Research and Innovation, 5 (1 ), 167-173.

 
DOI: https://doi.org/10.51976/ijari.511729 Effect of Skin Core Delamination on the Interlaminar Stress Distribution in Sandwich Composites Avnish Kumar Shukla
Ashutosh Kumar
Hukam Singh
Rakesh Kumar Shukla
Pawan Mishra

Shukla, A.K., Kumar, A. , Singh, H. , Shukla, R.K., & Mishra, P. (2017). Effect of Skin-core Delamination on the Interlaminar Stress Distribution in Sandwich Composites.  International Journal of Advance Research and Innovation, 5 (1 ), 174-180.

 
DOI: https://doi.org/10.51976/ijari.511730 Economic Dispatch with Integrated Wind-Thermal using Particle Swarm Optimization R Saravanan
S Subramanian
V Dharmalingam
S Ganesan

Saravanan, R. , Subramanian, S. , Dharmalingam, V. , & Ganesan, S. (2017). Economic Dispatch with Integrated Wind-thermal using Particle Swarm Optimization.  International Journal of Advance Research and Innovation, 5 (1 ), 181-184.
DOI: https://doi.org/10.51976/ijari.511731 Performance Enhancement of Solar Water Heater using Phase Change Materials (PCM): A Review Paras Sachdeva

Sachdeva, P. (2017). Performance Enhancement of Solar Water Heater using Phase Change Materials (PCM): A Review.  International Journal of Advance Research and Innovation, 5 (1 ), 185-192.
DOI: https://doi.org/10.51976/ijari.511732 Impact of Clearance Contact on the Performance of Hydrodynamic Journal Bearing System Harpreet Singh Bitta
Gobind Pal
RK Awasthi
Manjeet Singh Minhas
Davinder Singh
Navneet Singh
Vijay Kumar
Keshwer Equbal Khan

Bitta1, H.S., Pal, G. , Awasthi, R.K., Minhas, M.S., Singh, D. , Singh, N. , Kumar, V. , & Khan, K.E. (2017). Impact of Clearance Contact on the Performance of Hydrodynamic Journal Bearing System.  International Journal of Advance Research and Innovation, 5 (1 ), 193-201.
DOI: https://doi.org/10.51976/ijari.511733 Porous Radiant Burner for Domestic Cooking Purpose (A Review) Vijay Kumar
Keshwer Eqbal Khan
Harpreet Singh Bitta

Keshwer, V.K., Khan, E. , & Bitta, H.S. (2017). Porous Radiant Burner for Domestic Cooking Purpose: A Review.  International Journal of Advance Research and Innovation, 5 (1 ), 202-210.
DOI: https://doi.org/10.51976/ijari.511734 Comparative Analysis of Biodiesel as a Additive with Pure Diesel in Single Cylinder Four Stroke Diesel Engine Processes Ashutosh Kumar
Hukam Singh
Avnish Kumar Shukla
Pawan Mishra
Ashutosh Kumar Rai

Kumar, A. , Singh, H. , Shukla, A.K., Mishra, P. , & Rai, A.K. (2017). Comparative Analysis of Biodiesel as a Additive with Pure Diesel in Single Cylinder Four Stroke Diesel Engine Processes.  International Journal of Advance Research and Innovation, 5 (1 ), 211-216.
DOI: https://doi.org/10.51976/ijari.511735 Gap Analysis of Value Stream Mapping Tool Implementation in Manufacturing Operation using Fuzzy Topsis Kamal Sachdeva
Vasu Kumar
AKS Chaudhary

Sachdeva, K. , Kumar, V. , & Chaudhary, A. (2017). Gap Analysis of Value Stream Mapping Tool Implementation in Manufacturing Operation using Fuzzy Topsis.  International Journal of Advance Research and Innovation, 5 (1 ), 217-221.